Products Menu
Click on the dropdown buttons to display each menu's content.
RF™ Strip & Prepare
Concrete Floor Stripper
This concentrated chemical stripper is formulated to remove various coatings from concrete floors, leaving them clean and fresh.
Usage Guidelines
- Dilution: 1:20 H2O
- Coverage Rate: 100 FT2 per gallon
Instructions
- Dilute the product 1:20 with water.
- Apply the solution to the concrete floor.
- Let the solution dwell for 3-5 minutes.
- Scrub the area with a swing buffer or auto scrubber equipped with a black scrubbing pad.
- Apply more product to dry areas as needed.
- Clean the area thoroughly.
- Repeat steps 2-6 if necessary.
Links
RF™ Grind & Enhance
Remove blemishes and surface layer of the floor and allows RF™ Densify & Harden to penetrate the floor.
Usage Guidelines
- Coverage Rate: 800 FT2 per gallon
Instructions
- Attach oval adapters to black scrubbing pad.
- Attach 200-grit diamonds to the oval adapters
- Make 4, thorough, 1/3-overlapping passes, crosshatcing where possible.
- A slurry will form.
- Clean the floor completely.
Links
RF™ Harden & Densify
Penetrate and harden the floor from the inside out. This densifier reacts with the floor and forms crystals within the pores making it stronger and harder.
Usage Guidelines
- Coverage Rate: 600 FT2 per gallon
Instructions
- Spray-apply a thin layer of product onto the floor. Do not apply product too thick; do not allow product to puddle.
- Spread evenly using a figure-8 motion with microfiber pad and wand.
- Allow to dry for 1-hour.
Tools
- Sprayer
- Microfiber pad and wand.
Links
RF™ Acid & Stain Defender
Provides additional protection against harmful spills.
Usage Guidelines
- Dilution: 1:1 H2O
- Coverage Rate: 1500-2000 FT2 per gallon
Instructions
- Spray-apply a thin layer of product onto the floor. Do not apply product too thick.
- Spread evenly using a figure-8 motion with microfiber pad and wand.
- Allow to dry/cure comopletely - preferably overnight.
- Burnish with a high-speed burnisher and burnishing pad; make overlapping dry passes until floor finish is clean and clear.
Tools
- Sprayer.
- Microfiber pad and wand.
- High-speed burnisher and burnishing pad.
Links
RF™ Water & Oil Defender
Provides additional protection. Prevents oil from penetrating the floor and water reactions that can cause whiting.
Usage Guidelines
- Coverage Rate: 600-1200 FT2 per gallon
Instructions
- Liberally spray-apply product onto the floor. Do not apply product too thick.
- Spread evenly using a figure-8 motion with a microfiber pad and wand.
- Product should penetrate the concrete; if excess product dries on the surface, burnish to remove haze.
- Do not leave standing water on the floor until after 24 hrs.
Tools
- Sprayer.
- Microfiber pad and wand.
- High-speed burnisher and burnishing pad.
Links
RF™ Hard Surface Cleaner
Concrete & Terrazzo Floor Cleaner
Clean and maintain the floor's shiny appearance and increase it's durability, strength, and performance.
Usage Guidelines
- Coverage Rate: See product label for specific dilution rates.
Instructions
- Clean the floor thoroughly with an auto scrubber or mop & bucket.
- Recommended cleaning is 3 times per week.
Tools
- Auto Scrubber & Pad.
- Mop & Bucket.
Links
